Hoyt Carbon RX4 RH 70lb 30” KUIU VERDE 28-30"

Description

This is a Hoyt carbon RX-4 Set at 70 pounds right hand 30 inch draw black strings. Riser is storm finish with blackout limbs. The draw range for this bow is 28 inch to 30 inch. For no additional charge we can set this bow within that range in half inch increments. Draw weight is 60 to 70 pounds and can be set within those parameters for you also.
Hoyt's new ZTR Cam & ½ system is built on the shoulders of its ZT Series, which is known for producing fast arrow speeds while maintaining a smooth draw. The company's patent-pending Split Cable system uses a unique yoke and split ends that connect to wide-stance modules to balance the load evenly on either side of the lower cam, resulting in reduced cam lean. A spiraled groove on the bottom cam?s module causes one side of the split cable to move closer to the centerline of the bow during the draw cycle, resulting in Hoyt?s 3-D Shift Technology, which is designed to eliminate inherent torque and, therefore, the need for a flexing cable guard.
Hoyt?s engineers created a more solid back wall by replacing an adjustable draw stop with a machined module foot that creates greater surface-area contact with the cables. Two base cams and a rotating module offer draw lengths from 25-30 inches, in half-inch increments. Cam #2 covers 25-28 inches, while Cam #3 offers draw lengths of 28-30 inches. No bow press is required to adjust the module within the range of the base cam. Standard system letoff is 85 percent, with an 80 percent option.
FPS (ATA): 342
AXLE-TO-AXLE: 29
½
BRACE HEIGHT: 6
MASS WEIGHT: 3.9 LBS
CAM: ZTR
DRAW LENGTHS:  28-30?